Split Type heat pump X5
Air Source Residential Heat Pump , Split Type Heat Pump With LCD
Rated Input Power
Rated Heating Capacity
Outlet water temperature
Water output capacity
Capacity of Water Tank
High efficiency finned heat exchanger
Size of Outdoor unit
Outdoor unit N.W. (Kg)
Size of Water Tank
Water tank N.W. (Kg)
1. Split type heat pump X5 unit and water tank separate from the
host installation Connecting through the
connecting pipes, which is easy to install. Generally, host is
installed in the outdoor, and heat exchanger
water tanks can be installed in indoor or outdoor.
2. Safety, the electricity is completely separated from water,
without any poisonous gas, liquid or trash
letting while running.
3. Save energy, saving more energy by 70% comparing with ordinary
4. Protecting Environment. There isn't any burning gas from the
water heater. The refrigerant won't
contaminate the ozonosphere. So it benefits the society.
5. Supply water anytime, and not be affected by geographical and
6. Intelligent control, the water temperature can be adjusted as
needed and controlled by micro-computer automatically.
The Split type heat pump X5 can be installed at veranda, garage or
other place which offers easy installation
Supermarket, shopping malls, hotels, restaurants, office, hospital,
schools; Movie theaters,
fitness halls, clubs, bars, cafes, massage rooms, beauty shops,
Apartments, villas, home… where needs hot water.
1. Air source heat pump technology:
Heat pump is a promising technology that used the same mechanical
principles as refrigerators and air conditions to generate hot
(The heat pump works by extracting heat from the surrounding
air/water/soil and using it to heat low pressure liquid refrigerant
in the heat pumps evaporator, vaporizing the liquid.
The refrigerant then passes through the compressor, which raises
the refrigerant pressure and thus the temperature as well. The
heated refrigerant gas passed through the heat pump condenser,
where gives is off its heat to the water and condenses back into
the liquid state.
The liquid refrigerant then passed through an expansion valve or
capillary where the pressure is reduced and the cycle starts over.
Generally, air-source heat pump water heaters work much like a
refrigerator in reverse. The heat pump extracts the heat from warm
air, intensifies the heat with a compressor, delivers the heat to
the water, and exhausts the cooler air. Because it uses the warm
ambient air temperature to do most of the work, it is a very
efficient way to heat water.
2. Optimized use of Heat Pump technology
Heat pumps are inherently clean and reliable, and traditionally use
water to water or air to air technology. Our air to water system,
however, represents the best of both technologies, combining the
accessibility of air as the heat source, low investment cost,
emission free operation, easy installation and maintenance, with
the comfort of using water based heating system.
3. Energy Saving
Compared to conventional heated equipments such as electricity
resistance heater, gas/oil boiler and solar heater, a heat pump
operate as a cost as little as 25%.
4. Environment Friendly
A heat pump will not release harmful materials into the nature.
Also using heat pump as a heating solution will greatly reduce the
emission of carbon dioxide.
5. Wide Range of Applications
Heat pump is an optimal house heating and domestic hot water
heating solution in residential and a variety of commercial
applications. It is also widely used in pool water heating
6. Mainly Composing Parts
Heat pump mainly consists of a compressor, fan (applicable to air
to water), evaporator, condenser, and expansion valve (or